The hottest powder coating creates a world of envi

  • Detail

Powder coating creates an environment-friendly world and sets up a new image of the industry

powder coating creates an environment-friendly world and sets up a new image of the industry

December 15, 2009

[China coating information] the global economic crisis caused by the U.S. subprime mortgage crisis in 2008 impacted the global market. Under the influence of the crisis in which the strength of the financial team is indelible, China's foreign exports have fallen sharply. This has brought great pressure on China's economy, which relies on exports to drive domestic economic growth. In 2008, China's exports fell significantly year-on-year. With the country's pull on the domestic economic recovery, China's economy is gradually recovering, and China's CPI value has changed from negative to positive in November

the severe economic situation has had a great impact on China's powder coating industry. The reduction of China's exports in 2008 directly affected the furniture industry using powder coating, which has brought a great impact on the production and sales of powder coating. Many powder coating enterprises slowed down the pace of development and made internal adjustments and product structure adjustments during the years, so as to seize the opportunity and move forward steadily after the economic crisis

in 2008, China's coating industry still maintained a steady growth trend despite the impact of the financial crisis. The total production of coatings by Enterprises above the scale of the coating industry was 6.38 million tons, an increase of 6.82% year-on-year. Among them, the total production of industrial coatings was 4.4392 million tons, with a year-on-year increase of 5.6%. This growth rate is the smallest year-on-year increase in recent years. It can be seen that the financial crisis has had a huge impact on China's coating industry

development status of China's powder coating industry

with the rapid changes in the international economic situation, China's powder coating industry experienced the baptism of "ice and fire". From January to September 2008, before the arrival of the financial crisis, powder coatings still maintained a high-speed growth, and the prosperity index was very high. Followed by the obvious decline in the overall trend of the world economy in September, China's powder coatings also entered a trough period. After years of rapid growth, China's powder coating industry experienced negative growth for the first time. According to the industry statistics of the coating and coating professional committee of the Chinese society of chemical industry, the total sales volume of thermosetting powder coatings in China in 2008 was 720000 tons, an increase of only 5.9% compared with 2007, achieving a sales revenue of more than 12 billion yuan

growth of China's powder coating industry in recent years

year 2003, 2004, 2005, 2006, 2007, 2008

annual sales volume, 344251636872 tons

annual growth rate% 25.9% 23.5% 21.4% 23.5% 7.9% 5.9%

powder coating product structure and regional distribution

product structure

statistical results of the coating professional committee of the society of chemical industry of China show that, In 2008, the variety structure of powder coatings in China is: epoxy/poly mixed powder coatings account for 5.3%, polyester TGIC accounts for 24.1%, polyester HAA accounts for 6.9%, pure epoxy accounts for 18.5%, hydroxyl polyester/polyurethane system is 0.14%, GMA acrylic acid system is 0.05%, and other systems are 0.01%

geographical distribution

most of China's powder coating enterprises are located in coastal areas. In recent years, the Bohai Rim region has risen rapidly. In 2008, China's three powder coating industry bases in the Yangtze River Delta, the Pearl River Delta and the Bohai Rim region were formed. The sales of powder coatings in the three regions accounted for 93.4% of the total sales of powder coatings in the country, and only 6.6% of the market share in other regions. The situation that the south is more important than the north is broken

under the requirements of environmental protection, powder coatings establish a new image

powder coatings are environmentally friendly coatings that meet the "4E" standard. Because they do not contain volatile solvents, powder coatings are used to partially replace solvent-based coatings. Among many alternative water-based coatings that fully meet the requirements of environmental protection materials, high solid coatings, and radiation curing coatings, powder coatings have the highest degree of industrialization. The utilization rate of powder coatings is also very high. Therefore, today, when we vigorously develop environmental friendly coatings and limit solvent based coatings, powder coatings have better development opportunities

under the pressure of the financial crisis, domestic powder coating enterprises are also seeking a new way out for development. Some enterprises have abandoned the practice of reducing product quality at the expense of product quality and won the market by adjusting product structure. Bonding technology and microcapsule powder coating technology are attracting the attention of domestic enterprises, and some enterprises are carrying out the adjustment and research of products and equipment

suggestions for the development of powder coatings

the 2009 Copenhagen conference is in progress, and countries expect to reach a consensus on energy conservation and emission reduction. As an environment-friendly product, powder coating has a good development prospect despite the sharp decline in Russian imported extruders in October. However, China's powder coatings are also facing difficulties in development. Experimental data such as low product quality and backward technology have prominent features of automatic storage. In an economic environment that is increasingly important for environmental protection, energy conservation and emission reduction, powder coating enterprises must strengthen their own enterprise construction, so as to improve product quality, minimize or avoid the use of toxic and harmful substances in formulas, and reduce the use of harmful substances, Reduce the use of heavy metal pigments, reduce the use of organic tin, so that the powder coating products we produce are not safe in production, but safer in use

Copyright © 2011 JIN SHI